30kW - 45kW Series Home Standby System

30-45kW Series

Milbank is proud to offer a series of liquid-cooled Home Standby Systems powered by Briggs & Stratton. Featuring affordable options from 30kW - 45kW, these systems offer a permanent, reliable solution to power outage and provide a continuous connection to natural gas or liquid propane for years of uninterrupted operation.

Features

Automatic System Features

  • Fully Automatic – Advanced electronics will detect a utility power outage and automatically start the generator whether you are home or away.
  • GM Vortec Engine – Tested and approved on trucks and SUVs, world class 4 and 8 cylinder GM Vortec engines provide sophisticated yet extremely durable industrial grade power - perfect for the high power demands of most larger homes.
  • Computer-Friendly Power – A long life, commercial grade 4-pole 1800 RPM alternator provides robust, quiet, ultra smooth electricity, perfect for larger ‘smart’ homes.
  • Premium Warranty – The best comprehensive parts and labor warranty in the industry.
  • Quiet Operation – Engineered air flow, an automotive-style exhaust system, acoustic foam dampeners, and low 1800 RPM engine ensure quiet operation.
  • Durable All-Climate Enclosure – The durable storm grey steel enclosure is powder coated for excellent adhesion and improved resistance to chipping, abrasion and corrosion - perfect for years of all-season outdoor protection.
  • Turnkey Extras – Each system includes a battery charger and hour meter. The engine also comes pre-filled with synthetic oil, ethylene glycol long-life coolant and is pre-run at the factory, saving you time and money.

Accessories

Accessories

  • Power Management System Upgrade: Model MG0501440
    Featuring patented computer-controlled technology, this Power Management System upgrade further expands your generator’s range and performance by automatically prioritizing and managing 4 additional high-demand 240V appliances.
  • Remote System Status Monitor: All models
    This 8-fault remote status monitoring system is a standard, preventative accessory that provides customers with peace of mind knowing their generator is always operating correctly. Included with all Milbank generators.

Models

ModelMG30001 - 30kWMG45001 - 45kW
Watts LP/NG 30,000W (LP) / 27,000W (NG) 45,000W (LP) / 45,000W (NG)
Operation Fully Automatic Fully Automatic
Engine GM Vortec 3.0L inline 4 cylinder GM Vortec 5.0L V8
Operating RPM 1800 RPM 1800 RPM
Voltage 120/240V AC, Single Phase, Electronic Regulation 120/240V AC, Single Phase, Electronic Regulation
Amps LP/NG 125 (LP) / 112.5 (NG) 187.5 (LP) / 187.5 (NG)
Alternator Type 4-pole, brushless 4-pole, brushless
Full Pressure Lubrication Yes Yes
Fuel Type Propane (LP Vapor), Natural Gas Propane (LP Vapor), Natural Gas
Fuel Consumption
(at 1/2 Load )
92 FT3/HR Liquid Propane (LP) 259 FT3/HR Natural Gas (NG) 178 FT3/HR Liquid Propane (LP) 483 FT3/HR Natural Gas (NG)
Weekly Exerciser Yes Yes
Sound Attenuation Sound Shield™ Technology Sound Shield™ Technology
Battery Charger Yes Yes
Overcrank Protection Yes Yes
Diagnostic Alerts with Remote System Status Low Battery, Low Oil Pressure, Low Voltage, Fail to Start, Low Frequency, Engine Overspeed, High Temperature and Transfer Switch
Dimensions
(L x W x H)
84.5" x 39.5" x 41.5" 98.5" x 39.5" x 44"
Weight
(generator only)
1,800 lbs. 2,100 lbs.
Main Line Circuit Breaker 150 Amp 200 Amp
Battery Requirements (not included) 55 Amp Hour, 12 Volt DC, 650 CCA, VRLA 55 Amp Hour, 12 Volt DC, 650 CCA, VRLA
Total Harmonic Distortion Less than 5% Less than 5%
Limited Warranty 4 Years 4 Years

NOTE: Natural gas fuel supply pressure at the generator’s fuel inlet port should be between 5 to 7 inches of water (in W.C.) at full load with all gas appliances turned on and operating. LP Gas fuel supply pressure should be 11 to 14 inches of water (in W.C.) at full load with all gas appliances turned on and operating.

†Fuel consumption rates are estimated based on normal operating conditions at ½ load. Generator operation may be greatly affected by elevation and the cycling operation of multiple electrical appliances – fuel flow rates may vary depending on these factors. Milbank reserves the right to make changes in specifications and features shown herein, or discontinue the product described at any time without notice or obligation.

Transfer Switches

Transfer Switch Specifications (Sold Separately)

Model NumberMG2003993
Circuits Whole House
Amps 200A
Service Entrance Disconnect Yes
Dimensions
(L x W x H)
33" x 10.25" x 19"
Weight 64 lbs.
Common Features 120/240 Voltage, 2 Poles, 50/60 Frequency, NEMA 3R Enclosure, UL 1008 Listed
Power Management Method ACCM-III, Patented A/C Power Control Module™
NOTE: Other manufacturers may not be compatible with Milbank’s generators or automatic transfer switches.

 
Banner
Banner
Banner